Custom Roller Blinds South Ajax – Free Installation

A free-hanging roller will knock against the frame on a windy day. Two fixes work well. A hold-down bracket pins the bottom rail to the sill, and side channels do the same job while closing the light gap along the edges. We ask about open-window habits at the measure, because specifying the bracket up front is easier than adding it later.

Usually not well. A blind wide enough to span both has to mount outside the frame, and the post pushes the fabric forward so it hangs unevenly. Two blinds on a shared headrail look deliberate and roll straight. We line the join up with the post so the pair reads as one treatment from across the room.

The clutch is the part that gives. A hard pull can skip it, and the blind then rolls crooked or refuses to hold its position. Cordless and motorized versions remove the problem entirely, and cordless is our default in homes with small children. If a chain blind does get pulled off track, the repair is minor and the warranty covers it.

Often yes. A roller bracket needs roughly 40 millimetres of depth for a clean inside fit, and many aluminum frames give us that once the stop is measured properly. Where the frame is too tight, we mount outside on the surrounding wall and size the blind past the opening. Both look intentional. We decide window by window at the visit.