Custom Roller Blinds Streetsville – Free Installation

Usually yes, and rollers are the easiest window covering to reverse. Two small brackets inside the frame is the whole install, and the holes fill at move-out. Ask your landlord first, since some leases require window coverings to stay behind. Tell us at the measure if you plan to take them and we will note the bracket positions for you.

A bottom-up roller is one answer, since it rises from the sill and leaves the top of the window clear. The other is a solar screen at a low openness, around 1 or 3 percent, which reads as a solid surface from outside during the day and stays see-through from inside. Both work on a window that sits close to a sidewalk.

Over a sink, no. Steam and splash get into a woven fabric and it starts holding the smell of cooking after a couple of years. Vinyl is the right call there. It wipes down with a damp cloth and comes in textures that read as fabric from a few steps back, so it still matches the rollers in the next room.

Then the blind goes outside the frame. We mount to the face of the casing or the wall just above it, and size the roller to overlap the opening by about 40 millimetres on each side. When a frame has gone out of square, that overlap hides the difference better than an inside mount can. Bracket depth gets set so the fabric clears the sill.