Custom Roller Blinds Bramalea – Free Installation

Most buildings only care about what shows from outside, and a roller with white backing reads the same as every other window from the parking lot. Check your lease for a clause on drilling. Brackets take two small screws per side inside the frame and those holes fill in minutes. If management wants the original coverings left up, we mount ours outside the frame instead.

Not on its own. A light-filtering fabric holds privacy while the outside is brighter than the inside, so it works all day and stops working the moment you turn the lamps on. Townhouse rows here sit close to the sidewalk, so we usually put a room-darkening roller in the front rooms and keep the filtering fabric for windows facing the yard.

A vinyl or PVC-coated fabric. Bathroom windows in these houses are small and sit close to the shower, so the blind takes steam every day. Coated fabric wipes clean and will not warp when the humidity swings. We pair it with a sealed metal bottom bar so nothing corrodes at the lower edge, and we mount high enough that the roll stays clear of the tub surround.

Usually yes, because the valance sits where the roller bracket needs to go. We take it down, fit the blind, and leave the wall ready for paint where the valance was screwed into drywall. If you want to keep it, we can mount the roller inside the frame behind the valance, provided the frame is deep enough to clear the roll. We check that at the measure.