Custom Cellular Blinds Windfields – Free Installation

Yes. The motor and its rechargeable battery sit inside the head rail, which grows a little deeper as a result, so an inside fit needs the depth checked before ordering. On a stair landing or a high transom that is the whole reason to do it. On an ordinary bedroom window, a cordless lift does the same job with nothing to charge.

You get one call, usually about the same thing. People try to pull a cordless shade down by one corner, and a shade dragged at the edge goes crooked and then feels stuck. Taking hold of the bottom rail in the middle solves it. We leave a short card with each Windfields job that says exactly that, and it is worth taping inside a cupboard door so it survives a change of tenant. Everything else about them is obvious enough on the first try.

Into the vinyl window frame itself. There is a solid section of the frame at the head that takes a short screw, and that is standard practice on new builds rather than a workaround. Drywall on its own will not hold a shade for long. If the frame is too shallow, we move to the wall above the return and use proper anchors.

Probably not, but handle it properly. Lower it fully and let it dry hanging open, because raising a wet honeycomb sets creases into the cells that never quite come out. Rainwater carrying dirt off the frame can leave a tide line along the fabric. Once dry, the cells usually sit close to how they were. A second soaking is what does lasting damage.