Custom Vertical Blinds Bronte – Free Installation

There will be holes, and they are small ones. A vertical track fixes with a few screws into the head of the opening or the ceiling, which fill and touch up in minutes when you leave. Get the landlord's agreement in writing first, since it is drilling either way. Keep whatever was there before in a cupboard. The blind is cut to that door and will not fit the next place, so it stays with the house.

About 12 mm above whatever they have to clear, and on an old threshold that gets measured at the highest point, not the average. Vanes that brush anything will curl at the tip within a season. If the head is out of level, we can hang the track level and cut the vanes to follow the floor line, which looks deliberate and costs a little more.

More than people expect. Even a blackout vane overlaps its neighbour by only a few millimetres, so you get thin vertical lines of light down the whole blind, plus a gap along the top of the track. For a room that needs real dark, we would put a roller or a cellular shade on the window and use verticals only on the door.

Yes, on a motorized traverse track that pulls the vanes across and tilts them from a remote. It is heavier hardware than a roller motor and it costs more per metre, so it makes sense on a wide run you use every day and rarely on a single bedroom window. A wand is the quiet middle option, with no chain and no cord, and one hand does both jobs.